Nickel Stripper 1000ml 1L

Nickel stripper strips nickel plating from steel, copper, brass and silver easily and delivers the following pluses;

• Ready-to-use solution: no need for mixing
• Low hazzard
• Stripping rates of up to 50 microns per hour at 62 °C
• High capacity (1 litre can strip 40 grams of nickel)
• Low odour: minimum ventilation needed
• Supplied as a one-component, ready-to-use solution
• Non-electrolytic stripper: no need for a separate rectifier
• Long bath life
• Can be shipped worldwide.

   

  Operating Conditions

  Temperature Range	50 -65 °C (see notes)
  Tank	Glass (see notes below), steel or polypropylene
  Agitation	Mechanical (stirrer). Never use air agitation
  Stripping rate	See notes below
  Stripping capacity	Can strip up to 40 grams of nickel per litre
  Special storage requirements	None
  Shelf life	1 – 2 years
  Health and Safety classification	Irritant
  Special considerations	None
  Transport (UN number)	None: Not classified as dangerous for transport

   

  Notes:

  • Stripping should be carried out in a glass beaker on a hotplate stirrer fitted
    with a PTFE-coated stirring rod.
  • Suspend work to be stripped preferably on steel or titanium hooks/wire
  • Stripping rates can be almost doubled by using light mechanical agitation:
  • Stripping rate at 50°C = 10  microns per hour (no agitation)
  • Stripping rate at 50°C = 17  microns per hour (with agitation)
  • Stripping rate at 62°C = 50 microns per hour (with agitation)
  • Black smut remaining can be removed by ultrasonic cleaning or scouring with pad.